- +86 13570824123
- hr@sitec.cn
| Catalog number | Pressure rating(psi) | Connection type | Orifice (mm) | （μm） | （mm²） | Dimensions (mm) | ||
| A | B | C(Hex) | ||||||
| G202-7μm | 20,000 | LF4 | 2.7 | 7 | 530 | 60.5 | 72.9 | 22 |
| G202-40μm | 20,000 | 40 | ||||||
| G202-60μm | 20,000 | 60 | ||||||
| G203-7μm | 20,000 | LF6 | 5.1 | 7 | 530 | 71.8 | 85 | 27 |
| G203-40μm | 20,000 | 40 | ||||||
| G203-60μm | 20,000 | 60 | ||||||
| G204-7μm | 20,000 | LF9 | 7.8 | 7 | 1000 | 92 | 110 | 36 |
| G204-40μm | 20,000 | 40 | ||||||
| G204-60μm | 20,000 | 60 | ||||||
| G206-7μm | 20,000 | LF12 | 11.1 | 7 | 3960 | 146 | 167 | 50 |
| G206-40μm | 20,000 | 40 | ||||||
| G206-60μm | 20,000 | 60 | ||||||
| G208-7μm | 20,000 | LF16 | 14.3 | 7 | 3960 | 146 | 167 | 50 |
| G208-40μm | 20,000 | 40 | ||||||
| G208-60μm | 20,000 | 60 | ||||||
| Catalog number | Pressure rating(psi) | Connection type | Orifice (mm) | （μm） | （mm²） | Dimensions (mm) | ||
| A | B | C(Hex) | ||||||
| G302/602-7μm | 30/60000 | HF4 | 2.3 | 7 | 530 | 86 | 108 | 36 |
| G302/602-40μm | 30/60000 | 40 | ||||||
| G302/602-60μm | 30/60000 | 60 | ||||||
| G303/602-7μm | 30/60000 | HF6 | 3.2 | 7 | 530 | 86 | 112.8 | 36 |
| G303/602-40μm | 30/60000 | 40 | ||||||
| G303/602-60μm | 30/60000 | 60 | ||||||
| G304/602-7μm | 30/60000 | HF9 | 4.8 | 7 | 530 | 103 | 134 | 42 |
| G304/602-40μm | 30/60000 | 40 | ||||||
| G304/602-60μm | 30/60000 | 60 | ||||||
| Control type | Working pressure | Outer diameterof connecting pipe | Link type | Valve category | Filtration accuracy |
| G Filters | 20 20000psi | 1 1/8"O.D. | No standard connection | H High temperature valve | 7 7μm |
| 30 30000psi | 2 1/4"O.D. | T NPT | L Low temperature valve | 40 40μm | |
| 60 60000psi | 3 3/8"O.D. | R G、BSPP | H₂ Hydrogen | 60 60μm | |
| 4 9/16"O.D. | C Rc、RT、ZG | ||||
| 6 3/4"O.D. | K Single ferrule | ||||
| 8 1"O.D. |
The filter is recommended to be used in high-pressure systems that require both large filter area and high flow rate. It is widely used in chemical treatment and industrial fields. The effective filter area of this cup design is about 6 times that of the disk type.
Nominal hole size of the filter element: the maximum hole size calculated by the pressure required to form bubbles from the surface of the filter element when the filter element is immersed in the test liquid.
STK high-pressure filter filters high-pressure gas or liquid. The filter element can be easily replaced without first removing the filter in front of the tube. The filter element is made of sintered material with a bore diameter of 5 µ m or 10 µ m.
Drive air supply: 1~8bar;Output pre...
Manual control pressure genertor1. ...
Maximum working pressure: 60,000psi...
High working pressure: can be used ...
The hydraulic 10MPa (1450psi) is us...
Maximum working pressure: 60,000 ps...
Shenzhen Siteke Pneumatic Hydraulic Co., Ltd.
Tel: 0755-27967320 27967260
Fax: 0755-27967330
Mailbox: hr@sitec.cn
Skype:13570824123
Wechat:+86 13570824123
Mobile ：+86 13570824123
Web: https://www.stkhp.com
Address: 19 Building, Dongcai Industrial Zone, Gushu, Bao'an District, Shenzhen
Copyright © 2012-2021 Shenzhen Siteke Pneumatic Hydraulic Co., Ltd. Copyright 粤ICP备15051776号
